| Quantity: | |
|---|---|
1. Equipped with two cutting tables to save loading and unloading time.
2. The fully enclosed structure not only meets environmental requirements, but also improves safety, enhances machine dynamics and acceleration.
3. Auto Recut-Stable and efficient cutting.
When real-time in-head sensor detects the plate was not cut through, the cutting head will automatically do recut.
4. Cutting Path Monitor
Monitor cutting quality by BLT internal sensor, real-time adjust parameters to improve performance and efficiency.
| Model | JLMAP3015 | JLMAP4015 | JLMAP4020 |
Fiber laser power | 3000-80000w Raycus/Max | ||
Cutting range | 3000*1500mm | 4000*1500mm | 4000*2000mm |
Cutting material | Carbon steel ,Stainless steel ,Galvanized sheet, Aluminum, Brass, | ||
PositionaI accuracy (mm/m) | X /Y axle : ±0.03, Z axle :±0.01 | ||
repeated positioning accuracy(mm) | X /Y axle : ±0.01, Z axle :±0.005 | ||
Rapid positioning speed (m/min) | X /Y axle :100, Z axle :60 | ||
Acceleration speed(G) | 1.3 | ||
The European version shuttle table laser cutting machine is mainly used in industries such as sheet metal processing, kitchen appliances, chassis and cabinets, lighting and advertising, automotive parts, mechanical equipment, etc. It can cut various metal materials such as MS, SS, Al etc.
 |  |  |  |
It include Screw air compressor ,freeze dryer, 5pcs Fine filter and 1 set Air Tank.
1. Do you provide installation and training service?
Sure. Our engineer can go to your company to install machine and training.
2. What is cost for installation and training?
The cost include visa, round tickets ,salary ,meal and accommodation.
3. If we install machine by ourselves, can you support us ?
Yes, we support you to install and operation. Dont worry.
1. Equipped with two cutting tables to save loading and unloading time.
2. The fully enclosed structure not only meets environmental requirements, but also improves safety, enhances machine dynamics and acceleration.
3. Auto Recut-Stable and efficient cutting.
When real-time in-head sensor detects the plate was not cut through, the cutting head will automatically do recut.
4. Cutting Path Monitor
Monitor cutting quality by BLT internal sensor, real-time adjust parameters to improve performance and efficiency.
| Model | JLMAP3015 | JLMAP4015 | JLMAP4020 |
Fiber laser power | 3000-80000w Raycus/Max | ||
Cutting range | 3000*1500mm | 4000*1500mm | 4000*2000mm |
Cutting material | Carbon steel ,Stainless steel ,Galvanized sheet, Aluminum, Brass, | ||
PositionaI accuracy (mm/m) | X /Y axle : ±0.03, Z axle :±0.01 | ||
repeated positioning accuracy(mm) | X /Y axle : ±0.01, Z axle :±0.005 | ||
Rapid positioning speed (m/min) | X /Y axle :100, Z axle :60 | ||
Acceleration speed(G) | 1.3 | ||
The European version shuttle table laser cutting machine is mainly used in industries such as sheet metal processing, kitchen appliances, chassis and cabinets, lighting and advertising, automotive parts, mechanical equipment, etc. It can cut various metal materials such as MS, SS, Al etc.
| | | |
It include Screw air compressor ,freeze dryer, 5pcs Fine filter and 1 set Air Tank.
1. Do you provide installation and training service?
Sure. Our engineer can go to your company to install machine and training.
2. What is cost for installation and training?
The cost include visa, round tickets ,salary ,meal and accommodation.
3. If we install machine by ourselves, can you support us ?
Yes, we support you to install and operation. Dont worry.
